Hi, Sign in
Wider rim brings more stablities, better grip and control, especially on soft and complex road condition. Besides, it’s better if a design of wide carbon rims can reduce wind & rolling resistance, provide comfort. Our SoarRocs SR3050 is the masterpiece. 50mm wide with inner 45mm width, size 27.5inch and aerodynamic shape, strong passing capacity and moderate weight. It’s totally a weapon for your wild racing among jungles,mud,sands,or play the downhill.
Rim depth – 30mm
Rim width – 50mm
Inner width – 45mm
Rim weight -27.5 inch – 495 grams / 29er – 525 grams
Please don’t hesitate contact us for samples or wholesale custom cooperation! There have flexible terms and custom service for wholesale orders and personal tailor service.
Specification ▼
Please message us if you have any questions,you will get prompt reply.–SoarRocs
▶HOOKLESS BEAD
For 50mm wide carbon rims,inflating pressure is much lower than narrow tires,you can buy and use 2.8 plus tire everywhere. The hookless bead helps the process of install tires much easier. Besides, We designed the rim lip arrived 2.5mm thick to keep the stiffness which helps releases the impact stresses on both the front and sides
More importantly, Soarrocs SR3050 carbon fibre rims utilizing multi angle fiber reinforced system.Via this technique,the torsion performance is perfectly good. it play a great role to improve the strength, increase the resist compression or tensile coefficient.You can gain reliable strength,powerful stability from using our SR3050 carbon MTB rim on your mtb wheelset 29er or 27.5 inch.
▶BEAD LOCK
- Lock tires more firmly
- Tires not slippery
Both the good handling and safety are two essential factors to a rim of MTB wheel.Our raised bead lock design helps lock the tire more firmly, it can avoid tires slippery, increasing security,bring you reliable experience.
▶NIPPLES BED
- Extra carbon strip to enhance spoke tension
- Test max 300kgf is ok (Actual use around 130kgf is enough)
Early from rim research, we tested the spokes tension at 300 kgf usually to see weather the nipples bed is stiff enough or not. Sure, spokes hole must be ok without any crack.After that,we’re confidently to say the nipples bed is strong enough(Actual use around 130kgf ).The key to keep nipples bed strength be stable and powerful is we design to laying the rim with best carbon fiber slice by slice,most importantly,Soarrocs laser positioning technique helps every piece of carbon fiber is in correct position.